laradock logo







Introduction

Laradock is a full PHP development environment for Docker.

It supports a variety of common services, all pre-configured to provide a ready PHP development environment.



Use Docker First - Learn About It Later!


Features

  • Easy switch between PHP versions: 8.1, 8.0, 7.4, 7.3, 7.2, 7.1, 5.6…
  • Choose your favorite database engine: MySQL, Postgres, MariaDB…
  • Run your own stack: Memcached, HHVM, RabbitMQ…
  • Each software runs on its own container: PHP-FPM, NGINX, PHP-CLI…
  • Easy to customize any container, with simple edits to the Dockerfile.
  • All Images extend from an official base Image. (Trusted base Images).
  • Pre-configured NGINX to host any code at your root directory.
  • Can use Laradock per project, or single Laradock for all projects.
  • Easy to install/remove software’s in Containers using environment variables.
  • Clean and well-structured Dockerfiles (Dockerfile).
  • The Latest version of the Docker Compose file (docker-compose).
  • Everything is visible and editable.
  • Fast Images Builds.

Quick Overview

Let’s see how easy it is to setup our demo stack PHP, NGINX, MySQL, Redis and Composer:

1 - Clone Laradock inside your PHP project:

git clone https://github.com/Laradock/laradock.git

2 - Enter the laradock folder and rename .env.example to .env.

cp .env.example .env

3 - Run your containers:

docker-compose up -d nginx mysql phpmyadmin redis workspace 

4 - Open your project’s .env file and set the following:

DB_HOST=mysql
REDIS_HOST=redis
QUEUE_HOST=beanstalkd

5 - Open your browser and visit localhost: http://localhost.

That's it! enjoy :)

Supported Services

Laradock, adheres to the ‘separation of concerns’ principle, thus it runs each software on its own Docker Container. You can turn On/Off as many instances as you want without worrying about the configurations.

To run a chosen container from the list below, run docker-compose up -d {container-name}. The container name {container-name} is the same as its folder name. Example to run the “PHP FPM” container, use the name “php-fpm”.

  • Web Servers:

    • NGINX
    • Apache2
    • Caddy
  • Load Balancers:

    • HAProxy
    • Traefik
  • PHP Compilers:

    • PHP FPM
    • HHVM
  • Database Management Systems:

    • MySQL
    • PostgreSQL
      • PostGIS
    • MariaDB
    • Percona
    • MSSQL
    • MongoDB
      • MongoDB Web UI
    • Neo4j
    • CouchDB
    • RethinkDB
    • Cassandra
  • Database Management Apps:

    • PhpMyAdmin
    • Adminer
    • PgAdmin
  • Cache Engines:

    • Redis
      • Redis Web UI
      • Redis Cluster
    • Memcached
    • Aerospike
    • Varnish
  • Message Brokers:

    • RabbitMQ
      • RabbitMQ Admin Console
    • Beanstalkd
      • Beanstalkd Admin Console
    • Eclipse Mosquitto
    • PHP Worker
    • Laravel Horizon
    • Gearman
    • Amazon Simple Queue Service
  • Mail Servers:

    • Mailu
    • MailCatcher
    • Mailhog
    • MailDev
  • Log Management:

    • GrayLog
  • Testing:

    • Selenium
  • Monitoring:

    • Grafana
    • NetData
  • Search Engines:

    • ElasticSearch
    • Apache Solr
    • Manticore Search
  • IDE’s

    • ICE Coder
    • Theia
    • Web IDE
  • Miscellaneous:

    • Workspace (Laradock container that includes a rich set of pre-configured useful tools)
      • PHP CLI
      • Composer
      • Git
      • Vim
      • xDebug
      • Linuxbrew
      • Node
      • V8JS
      • Gulp
      • SQLite
      • Laravel Envoy
      • Deployer
      • Yarn
      • SOAP
      • Drush
      • Wordpress CLI
      • dnsutils
    • Apache ZooKeeper (Centralized service for distributed systems to a hierarchical key-value store)
    • Kibana (Visualize your Elasticsearch data and navigate the Elastic Stack)
    • Dejavu (Edit your Elasticsearch data)
    • LogStash (Server-side data processing pipeline that ingests data from a multitude of sources simultaneously)
    • Jenkins (automation server, that provides plugins to support building, deploying and automating any project)
    • Certbot (Automatically enable HTTPS on your website)
    • Swoole (Production-Grade Async programming Framework for PHP)
    • SonarQube (continuous inspection of code quality to perform automatic reviews with static analysis of code to detect bugs and more)
    • Gitlab (A single application for the entire software development lifecycle)
    • PostGIS (Database extender for PostgreSQL. It adds support for geographic objects allowing location queries to be run in SQL)
    • Blackfire (Empowers all PHP developers and IT/Ops to continuously verify and improve their app’s performance)
    • Laravel Echo (Bring the power of WebSockets to your Laravel applications)
    • Mercure (Server-sent events)
    • Phalcon (A PHP web framework based on the model–view–controller pattern)
    • Minio (Cloud storage server released under Apache License v2, compatible with Amazon S3)
    • AWS EB CLI (CLI that helps you deploy and manage your AWS Elastic Beanstalk applications and environments)
    • Thumbor (Photo thumbnail service)
    • IPython (Provides a rich architecture for interactive computing)
    • Jupyter Hub (Jupyter notebook for multiple users)
    • Portainer (Build and manage your Docker environments with ease)
    • Docker Registry (The Docker Registry implementation for storing and distributing Docker images)
    • Docker Web UI (A browser-based solution for browsing and modifying a private Docker registry)

You can choose, which tools to install in your workspace container and other containers, from the .env file.

If you modify docker-compose.yml, .env or any dockerfile file, you must re-build your containers, to see those effects in the running instance.

If you can’t find your Software in the list, build it yourself and submit it. Contributions are welcomed :)


Join Us

Gitter

Gitpod


Awesome People

Laradock is an MIT-licensed open source project with its ongoing development made possible entirely by the support of all these smart and generous people, from code contributors to financial contributors. 💜

Project Maintainers


Mahmoud Zalt
@mahmoudz

Bo-Yi Wu
@appleboy

Philippe Trépanier
@philtrep

Mike Erickson
@mikeerickson

Dwi Fahni Denni
@zeroc0d3

Thor Erik
@thorerik

Winfried van Loon
@winfried-van-loon

TJ Miller
@sixlive

Yu-Lung Shao (Allen)
@bestlong

Milan Urukalo
@urukalo

Vince Chu
@vwchu

Huadong Zuo
@zuohuadong

Lan Phan
@lanphan

Ahkui
@ahkui

< Join Us >
@laradock

Code Contributors

Laradock Contributors

Financial Contributors

Open Collective backers

You can support us using any of the methods below:

1: Open Collective
2: Paypal
3: Github Sponsors
4: Patreon


Sponsors

Sponsoring is an act of giving in a different fashion. 🌱

Gold Sponsors

Sista AI - Unlock Your Full Potential With a Personal AI Coach. (www.sista.ai) Apiato - Build PHP API's faster!

Silver Sponsors

Bronze Sponsors

You can sponsor us using any of the methods below:

1: Sponsor via Open Collective.
2: Email us at [email protected].

Sponsors logos are displayed on the github repository page and the documentation website home page.

License

MIT © Mahmoud Zalt










Getting Started

Requirements

Installation

Choose the setup the best suits your needs.

A) Setup for Single Project

(Follow these steps if you want a separate Docker environment for each project)

A.1) Already have a PHP project:

1 - Clone laradock on your project root directory:

git submodule add https://github.com/Laradock/laradock.git

Note: If you are not using Git yet for your project, you can use git clone instead of git submodule.

To keep track of your Laradock changes, between your projects and also keep Laradock updated check these docs

2 - Make sure your folder structure should look like this:

* project-a
*   laradock-a
* project-b
*   laradock-b

(It’s important to rename the laradock folders to unique name in each project, if you want to run laradock per project).

3 - Go to the Usage section.

A.2) Don’t have a PHP project yet:

1 - Clone this repository anywhere on your machine:

git clone https://github.com/laradock/laradock.git

Your folder structure should look like this:

* laradock
* project-z

2 - Edit your web server sites configuration.

We’ll need to do step 1 of the Usage section now to make this happen.

cp .env.example .env

At the top, change the APP_CODE_PATH_HOST variable to your project path.

APP_CODE_PATH_HOST=../project-z/

Make sure to replace project-z with your project folder name.

3 - Go to the Usage section.

B) Setup for Multiple Projects:

(Follow these steps if you want a single Docker environment for all your projects)

1 - Clone this repository anywhere on your machine (similar to Steps A.2. from above):

git clone https://github.com/laradock/laradock.git

Your folder structure should look like this:

* laradock
* project-1
* project-2

Make sure the APP_CODE_PATH_HOST variable points to parent directory.

APP_CODE_PATH_HOST=../

2 - Go to your web server and create config files to point to different project directory when visiting different domains:

For Nginx go to nginx/sites, for Apache2 apache2/sites.

Laradock by default includes some sample files for you to copy app.conf.example, laravel.conf.example and symfony.conf.example.

3 - change the default names *.conf:

You can rename the config files, project folders and domains as you like, just make sure the root in the config files, is pointing to the correct project folder name.

4 - Add the domains to the hosts files.

127.0.0.1  project-1.test
127.0.0.1  project-2.test
...

If you use Chrome 63 or above for development, don’t use .dev. Why?. Instead use .localhost, .invalid, .test, or .example.

4 - Go to the Usage section.

Usage

Read Before starting:

If you are using Docker Toolbox (VM), do one of the following:


We recommend using a Docker Engine version which is newer than 19.03.0.


Warning: If you used an older version of Laradock it’s highly recommended to rebuild the containers you need to use see how you rebuild a container in order to prevent as much errors as possible.


1 - Enter the laradock folder and copy .env.example to .env

cp .env.example .env

You can edit the .env file to choose which software’s you want to be installed in your environment. You can always refer to the docker-compose.yml file to see how those variables are being used.

Depending on the host’s operating system you may need to change the value given to COMPOSE_FILE. When you are running Laradock on Mac OS the correct file separator to use is :. When running Laradock from a Windows environment multiple files must be separated with ;.

By default the containers that will be created have the current directory name as suffix (e.g. laradock_workspace_1). This can cause mixture of data inside the container volumes if you use laradock in multiple projects. In this case, either read the guide for multiple projects or change the variable COMPOSE_PROJECT_NAME to something unique like your project name.

2 - Build the environment and run it using docker-compose

In this example we’ll see how to run NGINX (web server) and MySQL (database engine) to host a PHP Web Scripts:

docker-compose up -d nginx mysql

Note: All the web server containers nginx, apache ..etc depends on php-fpm, which means if you run any of them, they will automatically launch the php-fpm container for you, so no need to explicitly specify it in the up command. If you have to do so, you may need to run them as follows: docker-compose up -d nginx php-fpm mysql.

You can select your own combination of containers from this list.

(Please note that sometimes we forget to update the docs, so check the docker-compose.yml file to see an updated list of all available containers).


3 - Enter the Workspace container, to execute commands like (Artisan, Composer, PHPUnit, Gulp, …)

docker-compose exec workspace bash

Alternatively, for Windows PowerShell users: execute the following command to enter any running container:

docker exec -it {workspace-container-id} bash

Note: You can add --user=laradock to have files created as your host’s user. Example:

docker-compose exec --user=laradock workspace bash

You can change the PUID (User id) and PGID (group id) variables from the .env file)


4 - Update your project configuration to use the database host

Open your PHP project’s .env file or whichever configuration file you are reading from, and set the database host DB_HOST to mysql:

DB_HOST=mysql

You need to use the Laradock’s default DB credentials which can be found in the .env file (ex: MYSQL_USER=). Or you can change them and rebuild the container.

If you want to install Laravel as PHP project, see How to Install Laravel in a Docker Container.


5 - Open your browser and visit your localhost address.

Make sure you add use the right port number as provided by your running server.

http://localhost

If you followed the multiple projects setup, you can visit http://project-1.test/ and http://project-2.test/.









Documentation

List current running Containers

docker ps

You can also use the following command if you want to see only this project containers:

docker-compose ps


Close all running Containers

docker-compose stop

To stop single container do:

docker-compose stop {container-name}


Delete all existing Containers

docker-compose down


Enter a Container

Run commands in a running Container.

1 - First list the currently running containers with docker ps

2 - Enter any container using:

docker-compose exec {container-name} bash

Example: enter MySQL container

docker-compose exec mysql bash

Example: enter to MySQL prompt within MySQL container

docker-compose exec mysql mysql -udefault -psecret

3 - To exit a container, type exit.


Edit default Container config

Open the docker-compose.yml and change anything you want.

Examples:

Change MySQL Database Name:

    environment:
        MYSQL_DATABASE: laradock
    ...

Change Redis default port to 1111:

    ports:
        - "1111:6379"
    ...


Edit a Docker Image

1 - Find the Dockerfile of the image you want to edit,
example for mysql it will be mysql/Dockerfile.

2 - Edit the file the way you want.

3 - Re-build the container:

docker-compose build mysql

More info on Containers rebuilding here.


Build/Re-build Containers

If you do any change to any Dockerfile make sure you run this command, for the changes to take effect:

docker-compose build

Optionally you can specify which container to rebuild (instead of rebuilding all the containers):

docker-compose build {container-name}

You might use the --no-cache option if you want full rebuilding (docker-compose build --no-cache {container-name}).


Add more Docker Images

To add an image (software), just edit the docker-compose.yml and add your container details, to do so you need to be familiar with the docker compose file syntax.


View the Log files

The NGINX Log file is stored in the logs/nginx directory.

However to view the logs of all the other containers (MySQL, PHP-FPM,…) you can run this:

docker-compose logs {container-name}
docker-compose logs -f {container-name}

More options


Install PHP Extensions

You can set extensions to install in the .env file’s corresponding section (PHP_FPM, WORKSPACE, PHP_WORKER), just change the false to true at the desired extension’s line. After this you have to rebuild the container with the --no-cache option.

docker build --no-cache {container-name}


Change the (PHP-FPM) Version

By default, the latest stable PHP version is configured to run.

The PHP-FPM is responsible for serving your application code, you don’t have to change the PHP-CLI version if you are planning to run your application on different PHP-FPM version.

A) Switch from PHP 7.2 to PHP 5.6

1 - Open the .env.

2 - Search for PHP_VERSION.

3 - Set the desired version number:

PHP_VERSION=5.6

4 - Finally rebuild the image

docker-compose build php-fpm

For more details about the PHP base image, visit the official PHP docker images.


Change the PHP-CLI Version

Note: it’s not very essential to edit the PHP-CLI version. The PHP-CLI is only used for the Artisan Commands & Composer. It doesn’t serve your Application code, this is the PHP-FPM job.

The PHP-CLI is installed in the Workspace container. To change the PHP-CLI version you need to simply change the PHP_VERSION in the .env file as follow:

1 - Open the .env.

2 - Search for PHP_VERSION.

3 - Set the desired version number:

PHP_VERSION=7.2

4 - Finally rebuild the image

docker-compose build workspace

Change the PHP-CLI Version


Install xDebug

1 - First install xDebug in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_XDEBUG argument under the Workspace settings
c) set it to true
d) search for the PHP_FPM_INSTALL_XDEBUG argument under the PHP-FPM settings
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

For information on how to configure xDebug with your IDE and work it out, check this Repository or follow up on the next section if you use linux and PhpStorm.

###########################################################
################ Containers Customization #################
###########################################################

### WORKSPACE #############################################
...
WORKSPACE_INSTALL_XDEBUG=true
...
### PHP_FPM ###############################################
...
PHP_FPM_INSTALL_XDEBUG=true
...


Start/Stop xDebug:

By installing xDebug, you are enabling it to run on startup by default.

To control the behavior of xDebug (in the php-fpm Container), you can run the following commands from the Laradock root folder, (at the same prompt where you run docker-compose):

  • Stop xDebug from running by default: .php-fpm/xdebug stop.
  • Start xDebug by default: .php-fpm/xdebug start.
  • See the status: .php-fpm/xdebug status.

Note: If .php-fpm/xdebug doesn’t execute and gives Permission Denied error the problem can be that file xdebug doesn’t have execution access. This can be fixed by running chmod command with desired access permissions.


Install pcov

1 - First install pcov in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_PCOV argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_PCOV argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

Note that pcov is only supported on PHP 7.1 or newer. For more information on setting up pcov optimally, check the recommended section of the README


Install phpdbg

Install phpdbg in the Workspace and the PHP-FPM Containers:


1 - Open the .env.

2 - Search for WORKSPACE_INSTALL_PHPDBG.

3 - Set value to true

4 - Do the same for PHP_FPM_INSTALL_PHPDBG

WORKSPACE_INSTALL_PHPDBG=true
PHP_FPM_INSTALL_PHPDBG=true


Install Github Copilot Cli

Note: You must have Github Copilot access to use this feature.

Install gh-cli in the Workspace Container:


1 - Open the .env.

2 - Search for WORKSPACE_INSTALL_GITHUB_CLI.

3 - Set value to true

WORKSPACE_INSTALL_GITHUB_CLI=true

4 - Re-build the containers docker compose build workspace

5 - start your container docker compose up -d workspace // ..and all your other containers

6 - Enter the Workspace container:

docker-compose exec workspace bash

7 - Authenticate with your github account and follow the instructions::

gh auth login

8 - Install the copilot cli:

 gh extension install github/gh-copilot


Install ionCube Loader

1 - First install ionCube Loader in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_IONCUBE argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_IONCUBE argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

Always download the latest version of Loaders for ionCube .


Install Deployer

A deployment tool for PHP.

1 - Open the .env file
2 - Search for the WORKSPACE_INSTALL_DEPLOYER argument under the Workspace Container
3 - Set it to true

4 - Re-build the containers docker-compose build workspace

Deployer Documentation Here


Install SonarQube

An automatic code review tool.

SonarQube® is an automatic code review tool to detect bugs, vulnerabilities and code smells in your code. It can integrate with your existing workflow to enable continuous code inspection across your project branches and pull requests.
1 - Open the .env file
2 - Search for the SONARQUBE_HOSTNAME=sonar.example.com argument
3 - Set it to your-domain sonar.example.com
4 - docker-compose up -d sonarqube
5 - Open your browser: http://localhost:9000/

Troubleshooting:

if you encounter a database error:

docker-compose exec --user=root postgres
source docker-entrypoint-initdb.d/init_sonarqube_db.sh

If you encounter logs error:

docker-compose run --user=root --rm sonarqube chown sonarqube:sonarqube /opt/sonarqube/logs

SonarQube Documentation Here



Prepare Laradock for Production

It’s recommended for production to create a custom docker-compose.yml file, for example, production-docker-compose.yml

In your new production docker-compose.yml file, you should include only the containers you are planning to run in production (usage example: docker-compose -f production-docker-compose.yml up -d nginx mysql redis ...).

Note: The Database (MySQL/MariaDB/…) ports should not be forwarded on production, because Docker will automatically publish the port on the host unless specifically told not to. Forwarding these ports on production is quite insecure - so make sure to remove these lines:

ports:
    - "3306:3306"

To learn more about how Docker publishes ports, please read this excellent post on the subject.


Install Laravel from Container

1 - First you need to enter the Workspace Container.

2 - Install Laravel.

Example using Composer

composer create-project laravel/laravel my-cool-app "5.2.*"

We recommend using composer create-project instead of the Laravel installer, to install Laravel.

For more about the Laravel installation click here.

3 - Edit .env to Map the new application path:

By default, Laradock assumes the Laravel application is living in the parent directory of the laradock folder.

Since the new Laravel application is in the my-cool-app folder, we need to replace ../:/var/www with ../my-cool-app/:/var/www, as follow:

  APP_CODE_PATH_HOST=../my-cool-app/

4 - Go to that folder and start working.

cd my-cool-app

5 - Go back to the Laradock installation steps to see how to edit the .env file.


Run Artisan Commands

You can run artisan commands and many other Terminal commands from the Workspace container.

1 - Make sure you have the workspace container running.

docker-compose up -d workspace // ..and all your other containers

2 - Find the Workspace container name:

docker-compose ps

3 - Enter the Workspace container:

docker-compose exec workspace bash

Note: Should add --user=laradock (example docker-compose exec --user=laradock workspace bash) to have files created as your host’s user to prevent issue owner of log file will be changed to root then laravel website cannot write on log file if using rotated log and new log file not existed

4 - Run anything you want :)

php artisan
composer update
phpunit
vue serve

(browse the results at http://localhost:[WORKSPACE_VUE_CLI_SERVE_HOST_PORT])

vue ui

(browse the results at http://localhost:[WORKSPACE_VUE_CLI_UI_HOST_PORT])


Run Laravel Queue Worker

1 - Create a suitable configuration file (for example named laravel-worker.conf) for Laravel Queue Worker in php-worker/supervisord.d/ by simply copying from laravel-worker.conf.example

2 - Start everything up

docker-compose up -d php-worker


Run Laravel Scheduler

Laradock provides 2 ways to run Laravel Scheduler 1. Using cron in workspace container. Most of the time, when you start Laradock, it’ll automatically start workspace container with cron inside, along with setting to run schedule:run command every minute. 2. Using Supervisord in php-worker to run schedule:run. This way is suggested when you don’t want to start workspace in production environment. * Comment out cron setting in workspace container, file workspace/crontab/laradock bash # * * * * * laradock /usr/bin/php /var/www/artisan schedule:run >> /dev/null 2>&1 * Create a suitable configuration file (for ex., named laravel-scheduler.conf) for Laravel Scheduler in php-worker/supervisord.d/ by simply copying from laravel-scheduler.conf.example

  • Start php-worker container

     docker-compose up -d php-worker
    


    Use Browsersync

Using Use Browsersync with Laravel Mix.

  1. Add the following settings to your webpack.mix.js file. Please refer to Browsersync Options page for more options.
const mix = require('laravel-mix')

(...)

mix.browserSync({
  open: false,
  proxy: 'nginx' // replace with your web server container
})
  1. Run npm run watch within your workspace container.

  2. Open your browser and visit address http://localhost:[WORKSPACE_BROWSERSYNC_HOST_PORT]. It will refresh the page automatically whenever you edit any source file in your project.

  3. If you wish to access Browsersync UI for your project, visit address http://localhost:[WORKSPACE_BROWSERSYNC_UI_HOST_PORT].


Use Mailu

  1. You will need a registered domain.

  2. Required RECAPTCHA for signup email HERE

  3. Modify following environment variable in .env file

MAILU_RECAPTCHA_PUBLIC_KEY=<YOUR_RECAPTCHA_PUBLIC_KEY>
MAILU_RECAPTCHA_PRIVATE_KEY=<YOUR_RECAPTCHA_PRIVATE_KEY>
MAILU_DOMAIN=laradock.io
MAILU_HOSTNAMES=mail.laradock.io
  1. Open your browser and visit http://YOUR_DOMAIN.


Use NetData

  1. Run the NetData Container (netdata) with the docker-compose up command. Example:
docker-compose up -d netdata
  1. Open your browser and visit the localhost on port 19999: http://localhost:19999


Use Metabase

  1. Run the Metabase Container (metabase) with the docker-compose up command. Example: bash docker-compose up -d metabase
  2. Open your browser and visit the localhost on port 3030: http://localhost:3030

  3. You can use environment to configure Metabase container. See docs in: Running Metabase on Docker


Use Jenkins

1) Boot the container docker-compose up -d jenkins. To enter the container type docker-compose exec jenkins bash.

2) Go to http://localhost:8090/ (if you didn’t change your default port mapping)

3) Authenticate from the web app.

  • Default username is admin.
  • Default password is docker-compose exec jenkins cat /var/jenkins_home/secrets/initialAdminPassword.

(To enter container as root type docker-compose exec --user root jenkins bash).

4) Install some plugins.

5) Create your first Admin user, or continue as Admin.

Note: to add user go to http://localhost:8090/securityRealm/addUser and to restart it from the web app visit http://localhost:8090/restart.

You may wanna change the default security configuration, so go to http://localhost:8090/configureSecurity/ under Authorization and choosing “Anyone can do anything” or “Project-based Matrix Authorization Strategy” or anything else.


Use Redis

  1. First make sure you run the Redis Container (redis) with the docker-compose up command.

    docker-compose up -d redis
    

    To execute redis commands, enter the redis container first docker-compose exec redis bash then enter the redis-cli.

  2. Open your Laravel’s .env file and set the REDIS_HOST to redis

    REDIS_HOST=redis
    

    If you’re using Laravel, and you don’t find the REDIS_HOST variable in your .env file. Go to the database configuration file config/database.php and replace the default 127.0.0.1 IP with redis for Redis like this:

    'redis' => [
        'cluster' => false,
        'default' => [
            'host'     => 'redis',
            'port'     => 6379,
            'database' => 0,
        ],
    ],
    
  3. To enable Redis Caching and/or for Sessions Management. Also from the .env file set CACHE_DRIVER and SESSION_DRIVER to redis instead of the default file.

    CACHE_DRIVER=redis
    SESSION_DRIVER=redis
    
  4. Finally make sure you have the predis/predis package (~1.0) installed via Composer:

    composer require predis/predis:^1.0
    
  5. You can manually test it from Laravel with this code:

    \Cache::store('redis')->put('Laradock', 'Awesome', 10);
    


Use Redis Cluster

  1. First make sure you run the Redis-Cluster Container (redis-cluster) with the docker-compose up command. bash docker-compose up -d redis-cluster
  2. Open your Laravel’s config/database.php and set the redis cluster configuration. Below is example configuration with phpredis. Read the Laravel official documentation for more details. php 'redis' => [ 'client' => 'phpredis', 'options' => [ 'cluster' => 'redis', ], 'clusters' => [ 'default' => [ [ 'host' => 'redis-cluster', 'password' => null, 'port' => 7000, 'database' => 0, ], ], ], ],


Use Varnish

The goal was to proxy the request to varnish server using nginx. So only nginx has been configured for Varnish proxy. Nginx is on port 80 or 443. Nginx sends request through varnish server and varnish server sends request back to nginx on port 81 (external port is defined in VARNISH_BACKEND_PORT).

The idea was taken from this post

The Varnish configuration was developed and tested for Wordpress only. Probably it works with other systems.

Steps to configure varnish proxy server:

  1. You have to set domain name for VARNISH_PROXY1_BACKEND_HOST variable.
  2. If you want to use varnish for different domains, you have to add new configuration section in your env file. VARNISH_PROXY1_CACHE_SIZE=128m VARNISH_PROXY1_BACKEND_HOST=replace_with_your_domain.name VARNISH_PROXY1_SERVER=SERVER1
  3. Then you have to add new config section into docker-compose.yml with related variables: custom_proxy_name: container_name: custom_proxy_name build: ./varnish expose: - ${VARNISH_PORT} environment: - VARNISH_CONFIG=${VARNISH_CONFIG} - CACHE_SIZE=${VARNISH_PROXY2_CACHE_SIZE} - VARNISHD_PARAMS=${VARNISHD_PARAMS} - VARNISH_PORT=${VARNISH_PORT} - BACKEND_HOST=${VARNISH_PROXY2_BACKEND_HOST} - BACKEND_PORT=${VARNISH_BACKEND_PORT} - VARNISH_SERVER=${VARNISH_PROXY2_SERVER} ports: - "${VARNISH_PORT}:${VARNISH_PORT}" links: - workspace networks: - frontend
  4. change your varnish config and add nginx configuration. Example Nginx configuration is here: nginx/sites/laravel_varnish.conf.example.
  5. varnish/default.vcl is old varnish configuration, which was used in the previous version. Use default_wordpress.vcl instead.

How to run:

  1. Rename default_wordpress.vcl to default.vcl
  2. docker-compose up -d nginx
  3. docker-compose up -d proxy

Keep in mind that varnish server must be built after Nginx cause varnish checks domain affordability.

FAQ:

  1. How to purge cache?
    run from any cli:
    curl -X PURGE https://yourwebsite.com/.
  2. How to reload varnish?
    docker container exec proxy varnishreload
  3. Which varnish commands are allowed?
    • varnishadm
    • varnishd
    • varnishhist
    • varnishlog
    • varnishncsa
    • varnishreload
    • varnishstat
    • varnishtest
    • varnishtop
  4. How to reload Nginx?
    docker exec Nginx nginx -t
    docker exec Nginx nginx -s reload


Use Mongo

  1. First install mongo in the Workspace and the PHP-FPM Containers:
    • open the .env file
    • search for the WORKSPACE_INSTALL_MONGO argument under the Workspace Container
    • set it to true
    • search for the PHP_FPM_INSTALL_MONGO argument under the PHP-FPM Container
    • set it to true
  2. Re-build the containers
    • docker-compose build workspace php-fpm
  3. Run the MongoDB Container (mongo) with the docker-compose up command. bash docker-compose up -d mongo
  4. Add the MongoDB configurations to the config/database.php configuration file:

    'connections' => [
        
        'mongodb' => [
            'driver'   => 'mongodb',
            'host'     => env('DB_HOST', 'localhost'),
            'port'     => env('DB_PORT', 27017),
            'database' => env('DB_DATABASE', 'database'),
            'username' => '',
            'password' => '',
            'options'  => [
                'database' => '',
            ]
        ],
        
        // ...
        
    ],
    

5 - Open your Laravel’s .env file and update the following variables:

  • set the DB_HOST to your mongo.
  • set the DB_PORT to 27017.
  • set the DB_DATABASE to database.

6 - Finally make sure you have the jenssegers/mongodb package installed via Composer and its Service Provider is added.

composer require jenssegers/mongodb

More details about this here.

7 - Test it:

  • First, let your Models extend from the Mongo Eloquent Model. Check the documentation.
  • Enter the Workspace Container.
  • Migrate the Database php artisan migrate.


Use PhpMyAdmin

  1. Run the phpMyAdmin Container (phpmyadmin) with the docker-compose up command.

    # use with mysql
    docker-compose up -d mysql phpmyadmin
    
    # use with mariadb
    docker-compose up -d mariadb phpmyadmin
    

    Note: To use with MariaDB, open .env and set PMA_DB_ENGINE=mysql to PMA_DB_ENGINE=mariadb.

  2. Open your browser and visit the localhost on port 8081: http://localhost:8081, use server: “mysql”, user: “default” and password: “secret for the default mysql setup.


Use Gitlab

  1. Run the Gitlab Container (gitlab) with the docker-compose up command. Example: bash docker-compose up -d gitlab
  2. Open your browser and visit the localhost on port 8989: http://localhost:8989 Note: You may change GITLAB_DOMAIN_NAME to your own domain name like http://gitlab.example.com default is http://localhost


Use Gitlab Runner

  1. Retrieve the registration token in your gitlab project (Settings > CI / CD > Runners > Set up a specific Runner manually)
  2. Open the .env file and set the following changes:

    # so that gitlab container will pass the correct domain to gitlab-runner container
    GITLAB_DOMAIN_NAME=http://gitlab
    
    GITLAB_RUNNER_REGISTRATION_TOKEN=<value-in-step-1>
    
    # so that gitlab-runner container will send POST request for registration to correct domain
    GITLAB_CI_SERVER_URL=http://gitlab
    
  3. Open the docker-compose.yml file and add the following changes:

        gitlab-runner:
          environment: # these values will be used during `gitlab-runner register`
            - RUNNER_EXECUTOR=docker # change from shell (default)
            - DOCKER_IMAGE=alpine
            - DOCKER_NETWORK_MODE=laradock_backend
          networks:
            - backend # connect to network where gitlab service is connected
    
  4. Run the Gitlab-Runner Container (gitlab-runner) with the docker-compose up command. Example:

    docker-compose up -d gitlab-runner
    
  5. Register the gitlab-runner to the gitlab container

    docker-compose exec gitlab-runner bash
    gitlab-runner register
    
  6. Create a .gitlab-ci.yml file for your pipeline ```yml before_script:

    • echo Hello!

    job1: scripts: - echo job1 ```

  7. Push changes to gitlab

  8. Verify that pipeline is run successful


Use Adminer

  1. Run the Adminer Container (adminer) with the docker-compose up command. Example: bash docker-compose up -d adminer
  2. Open your browser and visit the localhost on port 8080: http://localhost:8080

Additional Notes

  • You can load plugins in the ADM_PLUGINS variable in the .env file. If a plugin requires parameters to work correctly you will need to add a custom file to the container. Find more info in section ‘Loading plugins’.

  • You can choose a design in the ADM_DESIGN variable in the .env file. Find more info in section ‘Choosing a design’.

  • You can specify the default host with the ADM_DEFAULT_SERVER variable in the .env file. This is useful if you are connecting to an external server or a docker container named something other than the default mysql.


Use Portainer

  1. Run the Portainer Container (portainer) with the docker-compose up command. Example: bash docker-compose up -d portainer
  2. Open your browser and visit the localhost on port 9010: http://localhost:9010


Use PgAdmin

  1. Run the pgAdmin Container (pgadmin) with the docker-compose up command. Example: bash docker-compose up -d postgres pgadmin
  2. Open your browser and visit the localhost on port 5050: http://localhost:5050
  3. At login page use default credentials: Username : [email protected] Password : admin


Use Beanstalkd

  1. Run the Beanstalkd Container: bash docker-compose up -d beanstalkd
  2. Configure Laravel to connect to that container by editing the config/queue.php config file.
    • first set beanstalkd as default queue driver
    • set the queue host to beanstalkd : QUEUE_HOST=beanstalkd beanstalkd is now available on default port 11300.
  3. Require the dependency package pda/pheanstalk using composer. Optionally you can use the Beanstalkd Console Container to manage your Queues from a web interface.

    • Run the Beanstalkd Console Container: bash docker-compose up -d beanstalkd-console
    • Open your browser and visit http://localhost:2080/ Note: You can customize the port on which beanstalkd console is listening by changing BEANSTALKD_CONSOLE_HOST_PORT in .env. The default value is 2080.

    • Add the server

      • Host: beanstalkd
      • Port: 11300
  4. Done


Use Confluence

  1. Run the Confluence Container (confluence) with the docker-compose up command. Example: bash docker-compose up -d confluence

2 - Open your browser and visit the localhost on port 8090: http://localhost:8090

Note: Confluence is a licensed application - an evaluation licence can be obtained from Atlassian.

You can set custom confluence version in CONFLUENCE_VERSION. Find more info in section ‘Versioning’

Confluence usage with Nginx and SSL.
  1. Find an instance configuration file in nginx/sites/confluence.conf.example and replace sample domain with yours.

  2. Configure ssl keys to your domain.

Keep in mind that Confluence is still accessible on 8090 anyway.


Use ElasticSearch

1 - Run the ElasticSearch Container (elasticsearch) with the docker-compose up command:

docker-compose up -d elasticsearch

2 - Open your browser and visit the localhost on port 9200: http://localhost:9200

The default username is elastic and the default password is changeme.

Install ElasticSearch Plugin

  1. Install an ElasticSearch plugin. bash docker-compose exec elasticsearch /usr/share/elasticsearch/bin/plugin install {plugin-name}
  2. Restart elasticsearch container bash docker-compose restart elasticsearch


Use MeiliSearch

1 - Run the MeiliSearch Container (meilisearch) with the docker-compose up command. Example:

docker-compose up -d meilisearch

2 - Open your browser and visit the localhost on port 7700 at the following URL: http://localhost:7700

The private API key is masterkey


Use Selenium

  1. Run the Selenium Container (selenium) with the docker-compose up command. Example: bash docker-compose up -d selenium
  2. Open your browser and visit the localhost on port 4444 at the following URL: http://localhost:4444/wd/hub


Use RethinkDB

The RethinkDB is an open-source Database for Real-time Web (RethinkDB). A package (Laravel RethinkDB) is being developed and was released a version for Laravel 5.2 (experimental).

  1. Run the RethinkDB Container (rethinkdb) with the docker-compose up command.

    docker-compose up -d rethinkdb
    
  2. Access the RethinkDB Administration Console http://localhost:8090/#tables for create a database called database.

  3. Add the RethinkDB configurations to the config/database.php configuration file:

    'connections' => [
        
        'rethinkdb' => [
            'name'      => 'rethinkdb',
            'driver'    => 'rethinkdb',
            'host'      => env('DB_HOST', 'rethinkdb'),
            'port'      => env('DB_PORT', 28015),
            'database'  => env('DB_DATABASE', 'test'),
        ]
        
        // ...
        
    ],
    
  4. Open your Laravel’s .env file and update the following variables:

    • set the DB_CONNECTION to your rethinkdb.
    • set the DB_HOST to rethinkdb.
    • set the DB_PORT to 28015.
    • set the DB_DATABASE to database.

Additional Notes


Use Minio

  1. Configure Minio:

    • You can change some settings in the .env file (MINIO_*)
    • You can install Minio Client on the workspace container: WORKSPACE_INSTALL_MC=true
  2. Run the Minio Container (minio) with the docker-compose up command. Example:

    docker-compose up -d minio
    
  3. Open your browser and visit the localhost on port 9000 at the following URL: http://localhost:9000

  4. Create a bucket either through the webui or using the Minio Client:

    mc mb minio/bucket
    
  5. When configuring your other clients use the following details:

    AWS_URL=http://minio:9000
    AWS_ACCESS_KEY_ID=access
    AWS_SECRET_ACCESS_KEY=secretkey
    AWS_DEFAULT_REGION=us-east-1
    AWS_BUCKET=test
    AWS_USE_PATH_STYLE_ENDPOINT=true
    
  6. In filesystems.php you should use the following details (s3):

    's3' => [
        'driver' => 's3',
        'key' => env('AWS_ACCESS_KEY_ID'),
        'secret' => env('AWS_SECRET_ACCESS_KEY'),
        'region' => env('AWS_DEFAULT_REGION'),
        'bucket' => env('AWS_BUCKET'),
        'endpoint' => env('AWS_URL'),
        'use_path_style_endpoint' => env('AWS_USE_PATH_STYLE_ENDPOINT', false)
    ],
    

AWS_USE_PATH_STYLE_ENDPOINT should set to true only for local purpose


Use Thumbor

Thumbor is a smart imaging service. It enables on-demand crop, resizing and flipping of images. (Thumbor)

1 - Configure Thumbor: - Checkout all the options under the thumbor settings

2 - Run the Thumbor Container (minio) with the docker-compose up command. Example:

docker-compose up -d thumbor

3 - Navigate to an example image on http://localhost:8000/unsafe/300x300/i.imgur.com/bvjzPct.jpg

For more documentation on Thumbor visit the Thumbor documenation page


Use AWS

1 - Configure AWS: - make sure to add your SSH keys in aws-eb-cli/ssh_keys folder

2 - Run the Aws Container (aws) with the docker-compose up command. Example:

docker-compose up -d aws

3 - Access the aws container with docker-compose exec aws bash

4 - To start using eb cli inside the container, initialize your project first by doing ‘eb init’. Read the aws eb cli docs for more details.


Use Grafana

1 - Configure Grafana: Change Port using GRAFANA_PORT if you wish to. Default is port 3000.

2 - Run the Grafana Container (grafana) with the docker-compose upcommand:

docker-compose up -d grafana

3 - Open your browser and visit the localhost on port 3000 at the following URL: http://localhost:3000

4 - Login using the credentials User = admin, Password = admin. Change the password in the web interface if you want to.


Use Graylog

1 - Boot the container docker-compose up -d graylog

2 - Open your Laravel’s .env file and set the GRAYLOG_PASSWORD to some passsword, and GRAYLOG_SHA256_PASSWORD to the sha256 representation of your password (GRAYLOG_SHA256_PASSWORD is what matters, GRAYLOG_PASSWORD is just a reminder of your password).

Your password must be at least 16 characters long You can generate sha256 of some password with the following command echo -n somesupersecretpassword | sha256sum

GRAYLOG_PASSWORD=somesupersecretpassword
GRAYLOG_SHA256_PASSWORD=b1cb6e31e172577918c9e7806c572b5ed8477d3f57aa737bee4b5b1db3696f09

3 - Go to http://localhost:9000/ (if your port is not changed)

4 - Authenticate from the app.

Username: admin Password: somesupersecretpassword (if you haven’t changed the password)

5 - Go to the system->inputs and launch new input


Use Traefik

To use Traefik you need to do some changes in .env and docker-compose.yml.

1 - Open .env and change ACME_DOMAIN to your domain and ACME_EMAIL to your email.

2 - You need to change the docker-compose.yml file to match the Traefik needs. If you want to use Traefik, you must not expose the ports of each container to the internet, but specify some labels.

2.1 For example, let’s try with NGINX. You must have:

nginx:
  build:
    context: ./nginx
    args:
      - PHP_UPSTREAM_CONTAINER=${NGINX_PHP_UPSTREAM_CONTAINER}
      - PHP_UPSTREAM_PORT=${NGINX_PHP_UPSTREAM_PORT}
      - CHANGE_SOURCE=${CHANGE_SOURCE}
  volumes:
    - ${APP_CODE_PATH_HOST}:${APP_CODE_PATH_CONTAINER}
    - ${NGINX_HOST_LOG_PATH}:/var/log/nginx
    - ${NGINX_SITES_PATH}:/etc/nginx/sites-available
  depends_on:
    - php-fpm
  networks:
    - frontend
    - backend
  labels:
    - "traefik.enable=true"
    - "traefik.http.services.nginx.loadbalancer.server.port=80"
    # https router
    - "traefik.http.routers.https.rule=Host(`${ACME_DOMAIN}`, `www.${ACME_DOMAIN}`)"
    - "traefik.http.routers.https.entrypoints=https"
    - "traefik.http.routers.https.middlewares=www-redirectregex"
    - "traefik.http.routers.https.service=nginx"
    - "traefik.http.routers.https.tls.certresolver=letsencrypt"
    # http router
    - "traefik.http.routers.http.rule=Host(`${ACME_DOMAIN}`, `www.${ACME_DOMAIN}`)"
    - "traefik.http.routers.http.entrypoints=http"
    - "traefik.http.routers.http.middlewares=http-redirectscheme"
    - "traefik.http.routers.http.service=nginx"
    # middlewares
    - "traefik.http.middlewares.www-redirectregex.redirectregex.permanent=true"
    - "traefik.http.middlewares.www-redirectregex.redirectregex.regex=^https://www.(.*)"
    - "traefik.http.middlewares.www-redirectregex.redirectregex.replacement=https://$$1"
    - "traefik.http.middlewares.http-redirectscheme.redirectscheme.permanent=true"
    - "traefik.http.middlewares.http-redirectscheme.redirectscheme.scheme=https"

instead of

nginx:
  build:
    context: ./nginx
    args:
      - PHP_UPSTREAM_CONTAINER=${NGINX_PHP_UPSTREAM_CONTAINER}
      - PHP_UPSTREAM_PORT=${NGINX_PHP_UPSTREAM_PORT}
      - CHANGE_SOURCE=${CHANGE_SOURCE}
  volumes:
    - ${APP_CODE_PATH_HOST}:${APP_CODE_PATH_CONTAINER}
    - ${NGINX_HOST_LOG_PATH}:/var/log/nginx
    - ${NGINX_SITES_PATH}:/etc/nginx/sites-available
    - ${NGINX_SSL_PATH}:/etc/nginx/ssl
  ports:
    - "${NGINX_HOST_HTTP_PORT}:80"
    - "${NGINX_HOST_HTTPS_PORT}:443"
  depends_on:
    - php-fpm
  networks:
    - frontend
    - backend


Use Mosquitto (MQTT Broker)

1 - Configure Mosquitto: Change Port using MOSQUITTO_PORT if you wish to. Default is port 9001.

2 - Run the Mosquitto Container (mosquitto) with the docker-compose upcommand:

docker-compose up -d mosquitto

3 - Open your command line and use a MQTT Client (Eg. https://github.com/mqttjs/MQTT.js) to subscribe a topic and publish a message.

4 - Subscribe: mqtt sub -t 'test' -h localhost -p 9001 -C 'ws' -v

5 - Publish: mqtt pub -t 'test' -h localhost -p 9001 -C 'ws' -m 'Hello!'


Use Tarantool (+ Admin panel)

1 - Configure Tarantool Port and Tarantool Admin Port using environment variables: TARANTOOL_PORT and TARANTOOL_ADMIN_PORT. Default ports are 3301 and 8002.

2 - Run the Tarantool and Tarantool Admin tool using docker-compose upcommand:

docker-compose up -d tarantool tarantool-admin

3 - You can open admin tool visiting localhost:8002

4 - There you should set Hostname with the value tarantool

5 - After that your tarantool data will be available inside admin panel.

6 - Also you can connect to tarantool server in console mode with this command:

docker-compose exec tarantool console

7 - There you can operate with tarantool database (official documentation can be helpful).


Use Keycloak

  1. Run the Keycloak Container (keycloak) with the docker-compose up command. Example:
docker-compose up -d keycloak
  1. Open your browser and visit the localhost on port 8081: http://localhost:8081

  2. Login with the following credentials:

    • Username: admin
    • Password: secret


Use Mailpit

  1. Run the Mailpit Container (mailpit) with the docker-compose up command. Example:
docker-compose up -d mailpit
  1. Open your browser and visit the localhost on port 8125: http://localhost:8125
  2. Setup config in your Laravel project’s .env file text MAIL_MAILER=smtp MAIL_HOST=mailpit MAIL_PORT=1125 MAIL_USERNAME=null MAIL_PASSWORD=null



Install CodeIgniter

To install CodeIgniter 3 on Laradock all you have to do is the following simple steps:

1 - Open the docker-compose.yml file.

2 - Change CODEIGNITER=false to CODEIGNITER=true.

3 - Re-build your PHP-FPM Container docker-compose build php-fpm.


Install Powerline

1 - Open the .env file and set WORKSPACE_INSTALL_POWERLINE and WORKSPACE_INSTALL_PYTHON to true.

2 - Run docker-compose build workspace, after the step above.

Powerline is required python


Install Symfony

1 - Open the .env file and set WORKSPACE_INSTALL_SYMFONY to true.

2 - Run docker-compose build workspace, after the step above.

3 - The NGINX sites include a default config file for your Symfony project symfony.conf.example, so edit it and make sure the root is pointing to your project web directory.

4 - Run docker-compose restart if the container was already running, before the step above.

5 - Visit symfony.test


Miscellaneous


Change the timezone

To change the timezone for the workspace container, modify the TZ build argument in the Docker Compose file to one in the TZ database.

For example, if I want the timezone to be New York:

    workspace:
        build:
            context: ./workspace
            args:
                - TZ=America/New_York
    ...

We also recommend setting the timezone in Laravel.


Add locales to PHP-FPM

To add locales to the container:

1 - Open the .env file and set PHP_FPM_INSTALL_ADDITIONAL_LOCALES to true.

2 - Add locale codes to PHP_FPM_ADDITIONAL_LOCALES.

3 - Re-build your PHP-FPM Container docker-compose build php-fpm.

4 - Check enabled locales with docker-compose exec php-fpm locale -a

Update the locale setting, default is POSIX

1 - Open the .env file and set PHP_FPM_DEFAULT_LOCALE to en_US.UTF8 or other locale you want.

2 - Re-build your PHP-FPM Container docker-compose build php-fpm.

3 - Check the default locale with docker-compose exec php-fpm locale


Adding cron jobs

You can add your cron jobs to workspace/crontab/laradock after the php artisan line.

* * * * * laradock /usr/bin/php /var/www/artisan schedule:run >> /dev/null 2>&1

# Custom cron
* * * * * root echo "Every Minute" > /var/log/cron.log 2>&1

Make sure you change the timezone if you don’t want to use the default (UTC).

If you are on Windows, verify that the line endings for this file are LF only, otherwise the cron jobs will silently fail.


Access workspace via ssh

You can access the workspace container through localhost:2222 by setting the INSTALL_WORKSPACE_SSH build argument to true.

To change the default forwarded port for ssh:

    workspace:
		ports:
			- "2222:22" # Edit this line
    ...

Then login using:

ssh -o PasswordAuthentication=no    \
    -o StrictHostKeyChecking=no     \
    -o UserKnownHostsFile=/dev/null \
    -p 2222                         \
    -i workspace/insecure_id_rsa    \
    laradock@localhost

To login as root, replace laradock@localhost with root@localhost.


Change the (MySQL) Version

By default MySQL 8.0 is running.

MySQL 8.0 is a development release. You may prefer to use the latest stable version, or an even older release. If you wish, you can change the MySQL image that is used.

Open up your .env file and set the MYSQL_VERSION variable to the version you would like to install.

MYSQL_VERSION=5.7

Available versions are: 5.5, 5.6, 5.7, 8.0, or latest. See https://store.docker.com/images/mysql for more information.


MySQL root access

The default username and password for the root MySQL user are root and root.

1 - Enter the MySQL container: docker-compose exec mysql bash.

2 - Enter mysql: mysql -uroot -proot for non root access use mysql -udefault -psecret.

3 - See all users: SELECT User FROM mysql.user;

4 - Run any commands show databases, show tables, select * from......


Create Multiple Databases

With MySQL.

Create createdb.sql from mysql/docker-entrypoint-initdb.d/createdb.sql.example in mysql/docker-entrypoint-initdb.d/* and add your SQL syntax as follow:

CREATE DATABASE IF NOT EXISTS `your_db_1` COLLATE 'utf8_general_ci' ;
GRANT ALL ON `your_db_1`.* TO 'mysql_user'@'%' ;


Change MySQL port

Modify the mysql/my.cnf file to set your port number, 1234 is used as an example.

[mysqld]
port=1234

If you need MySQL access from your host, do not forget to change the internal port number ("3306:3306" -> "3306:1234") in the docker-compose configuration file.


Use custom Domain

How to use a custom domain, instead of the Docker IP.

Assuming your custom domain is laravel.test

1 - Open your /etc/hosts file and map your localhost address 127.0.0.1 to the laravel.test domain, by adding the following:

127.0.0.1    laravel.test

2 - Open your browser and visit {http://laravel.test}

Optionally you can define the server name in the NGINX configuration file, like this:

server_name laravel.test;


Global Composer Build Install

Enabling Global Composer Install during the build for the container allows you to get your composer requirements installed and available in the container after the build is done.

1 - Open the .env file

2 - Search for the WORKSPACE_COMPOSER_GLOBAL_INSTALL argument under the Workspace Container and set it to true

3 - Now add your dependencies to workspace/composer.json

4 - Re-build the Workspace Container docker-compose build workspace


Add authentication for Magento

Adding authentication credentials for Magento 2.

1 - Open the .env file

2 - Search for the WORKSPACE_COMPOSER_AUTH argument under the Workspace Container and set it to true

3 - Now add your credentials to workspace/auth.json

4 - Re-build the Workspace Container docker-compose build workspace


Install Prestissimo

Prestissimo is a plugin for composer which enables parallel install functionality.

1 - Enable Running Global Composer Install during the Build:

Click on this Enable Global Composer Build Install and do steps 1 and 2 only then continue here.

2 - Add prestissimo as requirement in Composer:

a - Now open the workspace/composer.json file

b - Add "hirak/prestissimo": "^0.3" as requirement

c - Re-build the Workspace Container docker-compose build workspace


Install Node + NVM

To install NVM and NodeJS in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NODE argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

A .npmrc file is included in the workspace folder if you need to utilise this globally. This is copied automatically into the root and laradock user’s folders on build.


Install PNPM

pnpm uses hard links and symlinks to save one version of a module only ever once on a disk. When using npm or Yarn for example, if you have 100 projects using the same version of lodash, you will have 100 copies of lodash on disk. With pnpm, lodash will be saved in a single place on the disk and a hard link will put it into the node_modules where it should be installed.

As a result, you save gigabytes of space on your disk and you have a lot faster installations! If you’d like more details about the unique node_modules structure that pnpm creates and why it works fine with the Node.js ecosystem. More info here: https://pnpm.js.org/en/motivation

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NODE and WORKSPACE_INSTALL_PNPM argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace


Install Node + YARN

Yarn is a new package manager for JavaScript. It is so faster than npm, which you can find here.To install NodeJS and Yarn in the Workspace container:

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NODE and WORKSPACE_INSTALL_YARN argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace


Install NPM GULP toolkit

To install NPM GULP toolkit in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_GULP argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace


Install NPM BOWER

To install NPM BOWER package manager in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_BOWER argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace


Install NPM VUE CLI

To install NPM VUE CLI in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_VUE_CLI argument under the Workspace Container and set it to true

3 - Change vue serve port using WORKSPACE_VUE_CLI_SERVE_HOST_PORT if you wish to (default value is 8080)

4 - Change vue ui port using WORKSPACE_VUE_CLI_UI_HOST_PORT if you wish to (default value is 8001)

5 - Re-build the container docker-compose build workspace


Install NPM ANGULAR CLI

To install NPM ANGULAR CLI in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_ANGULAR_CLI argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace


Install npm-check-updates CLI

To install npm-check-updates CLI here in the Workspace container

1 - Open the .env file

2 - Make sure Node is also being installed (WORKSPACE_INSTALL_NODE set to true)

3 - Search for the WORKSPACE_INSTALL_NPM_CHECK_UPDATES_CLI argument under the Workspace Container and set it to true

4 - Re-build the container docker-compose build workspace


Install poppler-utils (and antiword combined)

Poppler is a PDF rendering library based on Xpdf PDF viewer.

This package contains command line utilities (based on Poppler) for getting information of PDF documents, convert them to other formats, or manipulate them: * pdfdetach – lists or extracts embedded files (attachments) * pdffonts – font analyzer * pdfimages – image extractor * pdfinfo – document information * pdfseparate – page extraction tool * pdfsig – verifies digital signatures * pdftocairo – PDF to PNG/JPEG/PDF/PS/EPS/SVG converter using Cairo * pdftohtml – PDF to HTML converter * pdftoppm – PDF to PPM/PNG/JPEG image converter * pdftops – PDF to PostScript (PS) converter * pdftotext – text extraction * pdfunite – document merging tool

poppler-utils is often used by popular PDF/DOC parsing packages in combination with antiword, hence both are installed when flags in .env are set.

To install poppler-utils (more here) in any of the workspace/php-fpm/php-worker/laravel-horizon container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_POPPLER_UTILS argument under the Workspace Container and set it to true

3 - Search for the PHP_FPM_INSTALL_POPPLER_UTILS argument under the Workspace Container and set it to true

4 - Search for the PHP_WORKER_INSTALL_POPPLER_UTILS argument under the Workspace Container and set it to true

5 - Search for the LARAVEL_HORIZON_INSTALL_POPPLER_UTILS argument under the Workspace Container and set it to true

6 - Re-build the container docker-compose build workspace php-fpm php-worker laravel-horizon


Install Linuxbrew

Linuxbrew is a package manager for Linux. It is the Linux version of MacOS Homebrew and can be found here. To install Linuxbrew in the Workspace container:

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_LINUXBREW argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace


Install FFMPEG

To install FFMPEG in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_FFMPEG argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

4 - If you use the php-worker container too, please follow the same steps above especially if you have conversions that have been queued.

PS Don’t forget to install the binary in the php-fpm container too by applying the same steps above to its container, otherwise you’ll get an error when running the php-ffmpeg binary.


Install BBC Audio Waveform Image Generator

audiowaveform is a C++ command-line application that generates waveform data from either MP3, WAV, FLAC, or Ogg Vorbis format audio files. Waveform data can be used to produce a visual rendering of the audio, similar in appearance to audio editing applications. Waveform data files are saved in either binary format (.dat) or JSON (.json).

To install BBC Audio Waveform Image Generator in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_AUDIOWAVEFORM argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

4 - If you use the php-worker or laravel-horizon container too, please follow the same steps above especially if you have processing that have been queued.

PS Don’t forget to install the binary in the php-fpm container too by applying the same steps above to its container, otherwise you’ll get an error when running the audiowaveform binary.


Install wkhtmltopdf

wkhtmltopdf is a utility for outputting a PDF from HTML

To install wkhtmltopdf in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_WKHTMLTOPDF argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

PS Don’t forget to install the binary in the php-fpm container too by applying the same steps above to its container, otherwise the you’ll get an error when running the wkhtmltopdf binary.


Install GNU Parallel

GNU Parallel is a command line tool to run multiple processes in parallel.

(see https://www.gnu.org/software/parallel/parallel_tutorial.html)

To install GNU Parallel in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_GNU_PARALLEL argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace


Install Supervisor

Supervisor is a client/server system that allows its users to monitor and control a number of processes on UNIX-like operating systems.

(see http://supervisord.org/index.html)

To install Supervisor in the Workspace container

1 - Open the .env file

2 - Set WORKSPACE_INSTALL_SUPERVISOR and WORKSPACE_INSTALL_PYTHON to true.

3 - Create supervisor configuration file (for ex., named laravel-worker.conf) for Laravel Queue Worker in php-worker/supervisord.d/ by simply copy from laravel-worker.conf.example

4 - Re-build the container docker-compose build workspace Or docker-compose up --build -d workspace



Common Terminal Aliases

When you start your docker container, Laradock will copy the aliases.sh file located in the laradock/workspace directory and add sourcing to the container ~/.bashrc file.

You are free to modify the aliases.sh as you see fit, adding your own aliases (or function macros) to suit your requirements.


Install Aerospike extension

1 - First install aerospike in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_AEROSPIKE argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_AEROSPIKE argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm


Install Laravel Envoy

A Tasks Runner.

1 - Open the .env file
2 - Search for the WORKSPACE_INSTALL_LARAVEL_ENVOY argument under the Workspace Container
3 - Set it to true

4 - Re-build the containers docker-compose build workspace

Laravel Envoy Documentation Here

Install php calendar extension

1 - Open the .env file
2 - Search for the PHP_FPM_INSTALL_CALENDAR argument under the PHP-FPM container
3 - Set it to true
4 - Re-build the containers docker-compose build php-fpm


Install libfaketime in php-fpm

Libfaketime allows you to control the date and time that is returned from the operating system. It can be used by specifying a special string in the PHP_FPM_FAKETIME variable in the .env file. For example: PHP_FPM_FAKETIME=-1d will set the clock back 1 day. See (https://github.com/wolfcw/libfaketime) for more information.

1 - Open the .env file
2 - Search for the PHP_FPM_INSTALL_FAKETIME argument under the PHP-FPM container
3 - Set it to true
4 - Search for the PHP_FPM_FAKETIME argument under the PHP-FPM container
5 - Set it to the desired string
6 - Re-build the containers docker-compose build php-fpm


Install YAML extension in php-fpm

YAML PHP extension allows you to easily parse and create YAML structured data. I like YAML because it’s well readable for humans. See http://php.net/manual/en/ref.yaml.php and http://yaml.org/ for more info.

1 - Open the .env file
2 - Search for the PHP_FPM_INSTALL_YAML argument under the PHP-FPM container
3 - Set it to true
4 - Re-build the container docker-compose build php-fpm


Install RDKAFKA extension in php-fpm

1 - Open the .env file
2 - Search for the PHP_FPM_INSTALL_RDKAFKA argument under the PHP-FPM container
3 - Set it to true
4 - Re-build the container docker-compose build php-fpm


Install RDKAFKA extension in workspace

This is needed for ‘composer install’ if your dependencies require Kafka.

1 - Open the .env file
2 - Search for the WORKSPACE_INSTALL_RDKAFKA argument under the WORKSPACE container
3 - Set it to true
4 - Re-build the container docker-compose build workspace


Install AST PHP extension

AST exposes the abstract syntax tree generated by PHP 7+. This extension is required by tools such as Phan, a static analyzer for PHP.

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_AST argument under the Workspace Container

3 - Set it to true

4 - Re-build the container docker-compose build workspace

Note If you need a specific version of AST then search for the WORKSPACE_AST_VERSION argument under the Workspace Container and set it to the desired version and continue step 4.


Install PHP Decimal extension

The PHP Decimal extension adds support for correctly-rounded, arbitrary-precision decimal floating point arithmetic. Applications that rely on accurate numbers (ie. money, measurements, or mathematics) can use Decimal instead of float or string to represent numerical values.

For more information visit the PHP Decimal website.

2 - Search for the WORKSPACE_INSTALL_PHPDECIMAL argument under the Workspace Container

2 - Search for the PHP_FPM_INSTALL_PHPDECIMAL argument under the PHP-FPM container

3 - Set it to true

4 - Re-build the container docker-compose build workspace php-fpm


Install Git Bash Prompt

A bash prompt that displays information about the current git repository. In particular the branch name, difference with remote branch, number of files staged, changed, etc.

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_GIT_PROMPT argument under the Workspace Container

3 - Set it to true

4 - Re-build the container docker-compose build workspace

Note You can configure bash-git-prompt by editing the workspace/gitprompt.sh file and re-building the workspace container. For configuration information, visit the bash-git-prompt repository.


Install Oh My ZSH


Install Dnsutils

1 - First install dnsutils in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_DNSUTILS argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_DNSUTILS argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

With the Laravel autocomplete plugin.

Zsh is an extended Bourne shell with many improvements, including some features of Bash, ksh, and tcsh.

Oh My Zsh is a delightful, open source, community-driven framework for managing your Zsh configuration.

Laravel autocomplete plugin adds aliases and autocompletion for Laravel Artisan and Bob command-line interfaces.

1 - Open the .env file

2 - Search for the SHELL_OH_MY_ZSH argument under the Workspace Container

3 - Set it to true

4 - Re-build the container docker-compose build workspace

5 - Use it docker-compose exec --user=laradock workspace zsh

Note You can configure Oh My ZSH by editing the /home/laradock/.zshrc in running container.

With the ZSH autosuggestions plugin.

ZSH autosuggestions plugin suggests commands as you type based on history and completions.

1 - Enable ZSH as described previously

2 - Set SHELL_OH_MY_ZSH_AUTOSUGESTIONS to true

3 - Rebuild and use ZSH as described previously

With bash aliases loaded.

Laradock provides aliases through the aliases.sh file located in the laradock/workspace directory. You can load it into ZSH.

1 - Enable ZSH as described previously

2 - Set SHELL_OH_MY_ZSH_ALIASES to true

3 - Rebuild and enjoy aliases


PHPStorm Debugging Guide

Remote debug Laravel web and phpunit tests.

Debugging Guide Here


Setup Google Cloud

Setting up Google Cloud for the docker registry.

gcloud auth configure-docker

Login to gcloud for use the registry and auth the permission.

gcloud auth login


Track your Laradock changes

  1. Fork the Laradock repository.
  2. Use that fork as a submodule.
  3. Commit all your changes to your fork.
  4. Pull new stuff from the main repository from time to time.


Improve speed on MacOS

Docker on the Mac is slow, at the time of writing. Especially for larger projects, this can be a problem. The problem is older than March 2016 - as it’s a such a long-running issue, we’re including it in the docs here.

So since sharing code into Docker containers with osxfs have very poor performance compared to Linux. Likely there are some workarounds:

Workaround A: using dinghy

Dinghy creates its own VM using docker-machine, it will not modify your existing docker-machine VMs.

Quick Setup giude, (we recommend you check their docs)

1) brew tap codekitchen/dinghy

2) brew install dinghy

3) dinghy create --provider virtualbox (must have virtualbox installed, but they support other providers if you prefer)

4) after the above command is done it will display some env variables, copy them to the bash profile or zsh or.. (this will instruct docker to use the server running inside the VM)

5) docker-compose up ...


Workaround B: using d4m-nfs

You can use the d4m-nfs solution in 2 ways, the first is by using the built-in Laradock integration, and the second is using the tool separately. Below is show case of both methods:

B.1: using the built in d4m-nfs integration

In simple terms, docker-sync creates a docker container with a copy of all the application files that can be accessed very quickly from the other containers. On the other hand, docker-sync runs a process on the host machine that continuously tracks and updates files changes from the host to this intermediate container.

Out of the box, it comes pre-configured for OS X, but using it on Windows is very easy to set-up by modifying the DOCKER_SYNC_STRATEGY on the .env

Usage

Laradock comes with sync.sh, an optional bash script, that automates installing, running and stopping docker-sync. Note that to run the bash script you may need to change the permissions chmod 755 sync.sh

1) Configure your Laradock environment as you would normally do and test your application to make sure that your sites are running correctly.

2) Make sure to set DOCKER_SYNC_STRATEGY on the .env. Read the syncing strategies for details.

# osx: 'native_osx' (default)
# windows: 'unison'
# linux: docker-sync not required

DOCKER_SYNC_STRATEGY=native_osx

3) set APP_CODE_CONTAINER_FLAG to APP_CODE_CONTAINER_FLAG=:nocopy in the .env file

4) Install the docker-sync gem on the host-machine:

./sync.sh install

5) Start docker-sync and the Laradock environment. Specify the services you want to run, as you would normally do with docker-compose up

./sync.sh up nginx mysql

Please note that the first time docker-sync runs, it will copy all the files to the intermediate container and that may take a very long time (15min+). 6) To stop the environment and docker-sync do:

./sync.sh down

Setting up Aliases (optional)

You may create bash profile aliases to avoid having to remember and type these commands for everyday development. Add the following lines to your ~/.bash_profile:

alias devup="cd /PATH_TO_LARADOCK/laradock; ./sync.sh up nginx mysql" #add your services
alias devbash="cd /PATH_TO_LARADOCK/laradock; ./sync.sh bash"
alias devdown="cd /PATH_TO_LARADOCK/laradock; ./sync.sh down"

Now from any location on your machine, you can simply run devup, devbash and devdown.

Additional Commands

Opening bash on the workspace container (to run artisan for example):

 ./sync.sh bash

Manually triggering the synchronization of the files:

./sync.sh sync

Removing and cleaning up the files and the docker-sync container. Use only if you want to rebuild or remove docker-sync completely. The files on the host will be kept untouched.

./sync.sh clean

Additional Notes

  • You may run laradock with or without docker-sync at any time using with the same .env and docker-compose.yml, because the configuration is overridden automatically when docker-sync is used.
  • You may inspect the sync.sh script to learn each of the commands and even add custom ones.
  • If a container cannot access the files on docker-sync, you may need to set a user on the Dockerfile of that container with an id of 1000 (this is the UID that nginx and php-fpm have configured on laradock). Alternatively, you may change the permissions to 777, but this is not recommended.

Visit the docker-sync documentation for more details.


B.2: using the d4m-nfs tool

D4m-nfs automatically mount NFS volume instead of osxfs one.

1) Update the Docker [File Sharing] preferences:

Click on the Docker Icon > Preferences > (remove everything form the list except /tmp).

2) Restart Docker.

3) Clone the d4m-nfs repository to your home directory.

git clone https://github.com/IFSight/d4m-nfs ~/d4m-nfs

4) Create (or edit) the file ~/d4m-nfs/etc/d4m-nfs-mounts.txt, and write the following configuration in it:

/Users:/Users

5) Create (or edit) the file /etc/exports, make sure it exists and is empty. (There may be collisions if you come from Vagrant or if you already executed the d4m-nfs.sh script before).

6) Run the d4m-nfs.sh script (might need Sudo):

~/d4m-nfs/d4m-nfs.sh

That’s it! Run your containers.. Example:

docker-compose up ...

Note: If you faced any errors, try restarting Docker, and make sure you have no spaces in the d4m-nfs-mounts.txt file, and your /etc/exports file is clear.


ca-certificates

To install your own CA certificates, you can add them to the workspace/ca-certificates folder. This way the certificates will be installed into the system ca store of the workspace container.


Upgrade Laradock

Moving from Docker Toolbox (VirtualBox) to Docker Native (for Mac/Windows). Requires upgrading Laradock from v3.* to v4.*:

  1. Stop the docker VM docker-machine stop {default}
  2. Install Docker for Mac or Windows.
  3. Upgrade Laradock to v4.*.* (git pull origin master)
  4. Use Laradock as you used to do: docker-compose up -d nginx mysql.

Note: If you face any problem with the last step above: rebuild all your containers docker-compose build --no-cache “Warning Containers Data might be lost!”









Help & Questions

Join the chat room on Gitter and get help and support from the community.

Gitter

You can as well can open an issue on Github (will be labeled as Question) and discuss it with people on Gitter.


Common Problems

Here’s a list of the common problems you might face, and the possible solutions.


I see a blank (white) page instead of the Laravel ‘Welcome’ page!

Run the following command from the Laravel root directory:

sudo chmod -R 777 storage bootstrap/cache


I see “Welcome to nginx” instead of the Laravel App!

Use http://127.0.0.1 instead of http://localhost in your browser.


I see an error message containing (address already in use) or (port is already allocated)

Make sure the ports for the services that you are trying to run (22, 80, 443, 3306, etc.) are not being used already by other programs on the host, such as a built in apache/httpd service or other development tools you have installed.


I get NGINX error 404 Not Found on Windows.

  1. Go to docker Settings on your Windows machine.
  2. Click on the Shared Drives tab and check the drive that contains your project files.
  3. Enter your windows username and password.
  4. Go to the reset tab and click restart docker.


The time in my services does not match the current time

  1. Make sure you’ve changed the timezone.
  2. Stop and rebuild the containers (docker-compose up -d --build <services>)


I get MySQL connection refused

This error sometimes happens because your Laravel application isn’t running on the container localhost IP (Which is 127.0.0.1). Steps to fix it:

  • Option A
    1. Check your running Laravel application IP by dumping Request::ip() variable using dd(Request::ip()) anywhere on your application. The result is the IP of your Laravel container.
    2. Change the DB_HOST variable on env with the IP that you received from previous step.
  • Option B
    1. Change the DB_HOST value to the same name as the MySQL docker container. The Laradock docker-compose file currently has this as mysql

I get stuck when building nginx on (fetch mirrors.aliyun.com/alpine/v3.5/main/x86_64/APKINDEX.tar.gz)

As stated on #749, Already fixed,just set CHANGE_SOURCE to false.

Custom composer repo packagist url and npm registry url

In China, the origin source of composer and npm is very slow. You can add WORKSPACE_NPM_REGISTRY and WORKSPACE_COMPOSER_REPO_PACKAGIST config in .env to use your custom source.

Example:

WORKSPACE_NPM_REGISTRY=https://registry.npmmirror.com
WORKSPACE_COMPOSER_REPO_PACKAGIST=https://packagist.phpcomposer.com


I got (Module build failed: Error: write EPIPE) while compiling react application

When you run npm build or yarn dev building a react application using webpack with elixir you may receive an Error: write EPIPE while processing .jpg images.

This is caused of an outdated library for processing .jpg files in ubuntu 16.04.

To fix the problem you can follow those steps

1 - Open the .env.

2 - Search for WORKSPACE_INSTALL_LIBPNG or add the key, if missing.

3 - Set the value to true:

WORKSPACE_INSTALL_LIBPNG=true

4 - Finally rebuild the workspace image

docker-compose build workspace

Apache2 container won’t start on mac m1

To fix the problem you can follow those steps

1 - Open the .env.

2 - Search for APACHE_FOR_MAC_M1 or add the key, if missing.

3 - Set the value to true:

APACHE_FOR_MAC_M1=true

4 - Finally rebuild the workspace image

docker-compose build apache2








Related Projects

Inspired by Laradock



Feel free to submit a PR for listing your project here.









Contributions

Open in Gitpod

Have a Question

If you have questions about how to use Laradock, please direct your questions to the discussion on Gitter. If you believe your question could help others, then consider opening an Issue (it will be labeled as Question) And you can still seek help on Gitter for it.

Found an Issue

If you have an issue or you found a typo in the documentation, you can help us by opening an Issue.

Steps to do before opening an Issue:

  1. Before you submit your issue search the archive, maybe your question was already answered couple hours ago (search in the closed Issues as well).

  2. Decide if the Issue belongs to this project or to Docker itself! or even the tool you are using such as Nginx or MongoDB…

If your issue appears to be a bug, and hasn’t been reported, then open a new issue.

This helps us maximize the effort we can spend fixing issues and adding new features, by not reporting duplicate issues.

Want a Feature

You can request a new feature by submitting an Issue (it will be labeled as Feature Suggestion). If you would like to implement a new feature then consider submitting a Pull Request yourself.

Update the Documentation (Site)

Laradock uses Hugo as website generator tool, with the Material Docs theme. You might need to check their docs quickly.

Go the DOCUMENTATION/content and search for the markdown file you want to edit

Note: Every folder represents a section in the sidebar “Menu”. And every page and sidebar has a weight number to show it’s position in the site.

To update the sidebar or add a new section to it, you can edit this DOCUMENTATION/config.toml toml file.

The site will be auto-generated in the docs/ folder by Travis CI.

Host the documentation locally

Option 1: Use Hugo Docker Image:

  1. Update the DOCUMENTATION/content.
  2. Go to DOCUMENTATION/.
  3. Run docker run --rm -it -v $PWD:/src -p 1313:1313 -u hugo jguyomard/hugo-builder hugo server -w --bind=0.0.0.0
  4. Visit http://localhost:1313/

Option 2: Install Hugo Locally:

  1. Install Hugo on your machine.
  2. Update the DOCUMENTATION/content.
  3. Delete the /docs folder from the root.
  4. Go to DOCUMENTATION/.
  5. Run the hugo command to generate the HTML docs inside a new /docs folder.

Support new Software (Add new Container)

  • Fork the repo and clone the code.

  • Create folder as the software name (example: mysql - nginx).

  • Add your Dockerfile in the folder “you may add additional files as well”.

  • Add the software to the docker-compose.yml file.

  • Make sure you follow the same code/comments style.

  • Add the environment variables to the .env.example if you have any.

  • MOST IMPORTANTLY update the Documentation, add as much information.

  • Submit a Pull Request, to the master branch.

Edit supported Software (Edit a Container)

  • Fork the repo and clone the code.

  • Open the software (container) folder (example: mysql - nginx).

  • Edit the files.

  • Make sure to update the Documentation in case you made any changes.

  • Submit a Pull Request, to the master branch.

Edit Base Image

  • Open any dockerfile, copy the base image name (example: FROM phusion/baseimage:latest).

  • Search for the image in the Docker Hub and find the source..

Most of the image in Laradock are official images, these projects live in other repositories and maintainer by other organizations.

Note: Laradock has two base images for (Workspace and php-fpm, mainly made to speed up the build time on your machine.

  • Find the dockerfiles, edit them and submit a Pull Request.

  • When updating a Laradock base image (Workspace or php-fpm), ask a project maintainer “Admin” to build a new image after your PR is merged.

Note: after the base image is updated, every dockerfile that uses that image, needs to update his base image tag to get the updated code.


Submit Pull Request Instructions

1. Before Submitting a Pull Request (PR)

Always Test everything and make sure its working:

  • Pull the latest updates (or fork of you don’t have permission)
  • Before editing anything:
    • Test building the container (docker-compose build –no-cache container-name) build with no cache first.
    • Test running the container with some other containers in real app and see of everything is working fine.
  • Now edit the container (edit section by section and test rebuilding the container after every edited section)
    • Testing building the container (docker-compose build container-name) with no errors.
    • Test it in a real App if possible.

2. Submitting a PR

Consider the following guidelines:

  • Search GitHub for an open or closed Pull Request that relates to your submission. You don’t want to duplicate efforts.

  • Make your changes in a new git branch:

     git checkout -b my-fix-branch master
    
  • Commit your changes using a descriptive commit message.

  • Push your branch to GitHub:

    git push origin my-fix-branch
    
  • In GitHub, send a pull request to laradock:master.

  • If we suggest changes then:

    • Make the required updates.
    • Commit your changes to your branch (e.g. my-fix-branch).
    • Push the changes to your GitHub repository (this will update your Pull Request).

If the PR gets too outdated we may ask you to rebase and force push to update the PR:

git rebase master -i
git push origin my-fix-branch -f

WARNING. Squashing or reverting commits and forced push thereafter may remove GitHub comments on code that were previously made by you and others in your commits.

3. After your PR is merged

After your pull request is merged, you can safely delete your branch and pull the changes from the main (upstream) repository:

  • Delete the remote branch on GitHub either through the GitHub web UI or your local shell as follows:

    git push origin --delete my-fix-branch
    
  • Check out the master branch:

    git checkout master -f
    
  • Delete the local branch:

    git branch -D my-fix-branch
    
  • Update your master with the latest upstream version:

    git pull --ff upstream master
    


Happy Coding :)