Exploded Views for Version 5.0.0
Published on March 1, 2023 by Martin Mueller
Among the many new features we would like to implement for version 5.0.0 is the Exploded View.
Simply click on the "Drawing" button and you will get a rotatable 3D view of your model or selected parts from your model. The parts in the exploded view can be labeled with numbers, designations or both. They can be colored or be made transparent. The extent of the explosion and the scale of the drawing can be adjusted.
We would like to thank all contributors for their generosity. Working on OpenCutList takes a lot of time and your donation is a sign of your appreciation.
Simply click on the "Drawing" button and you will get a rotatable 3D view of your model or selected parts from your model. The parts in the exploded view can be labeled with numbers, designations or both. They can be colored or be made transparent. The extent of the explosion and the scale of the drawing can be adjusted.
We would like to thank all contributors for their generosity. Working on OpenCutList takes a lot of time and your donation is a sign of your appreciation.
Our best wishes
The OpenCutList team
👍️ 3😀 2
Boris Beaulant
Posted on March 1, 2023
Bonjour Alexandros,
Je ne comprends pas votre proposition.
Je ne comprends pas votre proposition.
Stéphane Dandois
Posted on March 1, 2023
Bravo pour l'idée,
C'est un excellent outil pédagogique que vous proposez là.
Merci
C'est un excellent outil pédagogique que vous proposez là.
Merci
Miroslav Stanojević
Posted on March 1, 2023
Excellent...
L'autre jour on parlait à l'atelier du fait que ce serait bien de faire quelque chose de similaire, comme un dessin d'atelier. C'est comme si vous nous écoutiez, félicitations
L'autre jour on parlait à l'atelier du fait que ce serait bien de faire quelque chose de similaire, comme un dessin d'atelier. C'est comme si vous nous écoutiez, félicitations
salutations...
😀 1
Sebastian
Posted on March 1, 2023
Great feature, What you did so far is great , I am using that every day .
This will be very helpful feature when working on the project with someone, so we dont have to go back and forward to the computer to check the parts. Great !!!!!!
This will be very helpful feature when working on the project with someone, so we dont have to go back and forward to the computer to check the parts. Great !!!!!!
👍️ 1
yann
Posted on March 1, 2023
Bravo super idée ,jusqu'ici je faisais avec " Eclate et Déplace" pas forcément pratique
👍️ 1
yann
Posted on March 1, 2023
Je suis impatient de la sortie de cette mise à jour.
Il serait pas mal aussi la gestion des coupes d'onglets si je peux me permettre..
Il serait pas mal aussi la gestion des coupes d'onglets si je peux me permettre..
Nicolas Noobodyy
Posted on March 3, 2023
Excellente annonce, merci pour votre travail !
👍️ 1
Dylan Strachan
Posted on March 3, 2023
NEED THIS👍👍👍
👍️ 1
alejomen
Posted on March 6, 2023
HELL YEAHH 5.0!!! I I LOVE IT!
👍️ 1
Tavuro
Posted on March 7, 2023
Hello. Version 5 looks great. Let me suggest a button to change the direction of the grain of the pieces. Thanks for your effort
Pacôme Lepoutre
Posted on March 8, 2023
Wow !!!
Je l'ai déjà dit et je persiste : je suis scotché !!!
Un boulot d'une telle qualité, aussi bien fini, intuitif, très peu buggé, suivi, maintenu et amélioré, le tout en Open Source et - si j'ai bien suivi - en partie en bénévolat... ce n'est probablement pas unique, mais c'est en tout cas très rare !
Merci, merci, et encore merci ! Vous faites gagner un temps dingue et beaucoup de confort de travail à beaucoup de monde.
(Et j'en remets une couche sur le "Intuitif" ! Si rare dans le monde Open-Source, souvent "fait par des codeurs pour des codeurs". OCL est vraiment agréable à utiliser.)
Je l'ai déjà dit et je persiste : je suis scotché !!!
Un boulot d'une telle qualité, aussi bien fini, intuitif, très peu buggé, suivi, maintenu et amélioré, le tout en Open Source et - si j'ai bien suivi - en partie en bénévolat... ce n'est probablement pas unique, mais c'est en tout cas très rare !
Merci, merci, et encore merci ! Vous faites gagner un temps dingue et beaucoup de confort de travail à beaucoup de monde.
(Et j'en remets une couche sur le "Intuitif" ! Si rare dans le monde Open-Source, souvent "fait par des codeurs pour des codeurs". OCL est vraiment agréable à utiliser.)
❤️ 1
Boris Beaulant
Posted on March 8, 2023
Merci Pacôme 😊 !
Miroslav Stanojević
Posted on March 12, 2023
Greetings,
I am interested in whether there is an option so that when I have several of the same pieces, for example 750x560x1...750x560x3...750x560x1, and their markings or edges are not identical, they can be added together so that instead of the above we get a grouped 750x560x5. (as in the picture) and to ignore "Designation"
It is clear to me that when all the tags are identical, they will add everything together by confirming the "Group similar parts" option.
I am interested in whether there is an option so that when I have several of the same pieces, for example 750x560x1...750x560x3...750x560x1, and their markings or edges are not identical, they can be added together so that instead of the above we get a grouped 750x560x5. (as in the picture) and to ignore "Designation"
It is clear to me that when all the tags are identical, they will add everything together by confirming the "Group similar parts" option.
Boris Beaulant
Posted on March 12, 2023
Hi Miroslav,
As I can see, here it's the different "Description" that prevents grouping parts.
Even if I understand your need until you keep description visible, those parts can't be grouped because one displayed property is different.
But this problem could be solved if you check the option "Hide descriptions", because in this case, those parts will be grouped.
If edges are different parts will never been grouped event if you hide edges columns, because edges icon is always displayed.
As I can see, here it's the different "Description" that prevents grouping parts.
Even if I understand your need until you keep description visible, those parts can't be grouped because one displayed property is different.
But this problem could be solved if you check the option "Hide descriptions", because in this case, those parts will be grouped.
If edges are different parts will never been grouped event if you hide edges columns, because edges icon is always displayed.
Alexandros Annas
Posted on March 1, 2023
chaque pièce a son noms des couleurs et des lettres c'est encore plus mauvais que cadwork Avec tous ses numéros
pour etre simple et efficace il faurdais :
que chaque pièce a son noms
exemple
lamelo = L
ou non
tous le monde connaît